Wireless Bridge,5.8G Outdoor Point to Point Access PTMP WiFi PTP Network 300Mbps CPE 3KM Transmission Distance 14DBi High-Gain Antenna 2 LAN 100Mbps Ethernet Port 24V PoE Power Supply 2 Pack
Plug & Play Wireless Bridge: the CPE220 is 5.8Ghz long range outdoor WiFi internet network extender with a digital display. It complies with the 802.11a and 802.11n, plug to play for point-to-point auto pair connection without to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless transmission coverage, video stream & data transmit, and wireless monitoring simple and professional.
PTMP Pre-programmed: simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pairing and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired succeeded. Great for extend the internet to your garage, barn, store, and warehouse through 5.8Ghz wireless transmission, instead of complicated wire connection.
Long Range & High Speed: the wireless bridges work in 5.8Ghz with 300Mbps wireless transmission rate, support 3KM / 1.86 miles transmission distance(Barrier-free), provide up to 100Mbps wired network speed, extend the networks from one building to another even more, suitable for share internet access, video camera surveillance, or remote network WiFi hot point access (AP mode).
Point to Point Mode: Connect the both wireless bridges to the PoE power adapter will auto pair, no need connect to computer for the complicated configures, at point-to-point mdoe can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 3KM / 1.86 miles in 60 a degree angle of the front direction.
Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, in this way you can management different building's IP cameras in one system without wiring, you have to connect to computer to configure the master and slave bridge which need some internet knowledge.
Extend the internet network to another building up to 3KM / 1.86 miles through the point-to-point mode. The master bridge connects to the internet source through the LAN port of the PoE power adapter, the slave bridge connects to the router(AP mode) or directly to the computer through the LAN port of the PoE power adapter to expand your network/WiFi to another building, for example: extend your home network to the store, barn, garage and warehouse.