CPE120 2.4G Wireless Bridge 300Mbps PTP Outdoor Access Point
300Mbps transmission rate,100Mbps network speed
PT/PTMP connection
WiFi coverage before 2 houses with 1KM distance
802.11n Wi-Fi and MIMO technology
FLASH * DDR2: FLASH 8MB * DDR2 64MB
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
Support 128bit WPA、WPA2、WPA-PSK、WPA2-PSK security
Waterproof, dust proof, lighting protection
Operating Temperature: -30℃-55℃
Storage Temp: -40℃-70℃
【What CPE120 is】CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE120 give you ‘eyes on’ places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
CPE120 is an 2.4G 300Mbps outdoor CPE WiFi Bridge with PoE power.
It work in pairs for point to point connection,make more than 16PCS IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks
802.11n Wi-Fi and MIMO technology
FLASH * DDR2: FLASH 8MB * DDR2 64MB
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
Support 128bit WPA、WPA2、WPA-PSK、WPA2-PSK security
Package Content
2 * CPE120
2 * POE Power Adapter (24V0.5A)
1 * Quick Start Guide
1 * Ethernet Cable (1 meter)
4 * Plastic Hoop
The wireless transmission speed between 2 bridges max is 300Mbps. The highest wire network speed that can be achieved max is 100Mbps. Can not provide up to 300Mbps wired network speed, because the LAN port of the wireless bridge is a 100M port.