eoqo® 1080P Home Security Surveillance Camera System - PIR Trail Camera with Night Vision and Motion Detection Sensor - 24 Months Standby(Black)
[1080P HOME SECURITY MOTION DETECTION CAMERA] - Real FULL HD 1080P(1920*1080）resolution with H.264 codec,High quality pictures and videos, powerful night vision system could be shot clear picture or video up to 40 feet away,with wide view angle of 105 degree;
[EASY SETUP] - Insert micro SD card,Connect it with battery or power supply,One button to start working, This montion camera do not have WiFi or IP connection to protect your privacy & property not be hacker attacked;
[LONG STANDBY TIME] - Support 2 - 5 months standby with built in 2200mah battery operated, could be connect with power supply or extend power bank to make dual power system make more reliability, also extend standby time up to 24 months even more;
[PIR DISTANCE] - Built in high sensitive human heat sensor could be catch an angle of 120 degree and 50 feet away, built in automatic heat monitor system to ensure each triggered are effective, built in 4 piece (1 watt per unit) 940nm infrared LED light, support illuminate a 130 square feet room in dark condition, or up to 40 feet in open area;
1080P Home Security Surveillance Motion Detection Camera
1080P Home Security Surveillance Camera System - PIR Trail Camera with Night Vision and Motion Detection Sensor - 24 Months Standby(Black)
Works as a recorder to records what happenning when you not there,suit for office, home, frame house, warehouse or the important area;
Works as a baby monitor to catching the attractive images;
Works as a pet monitor camera to records your pet's hobby;
Works as a wildlife camera to capture images and videos,(Note: this camera not weatherproof, you need put it under an cover).
This motion sensor camera only records movement object,other time the system is in sleeping mode to save power,support connect with power bank or power supply support works up to 24 months.
Lens: 1/3" lens,f=3.1mm, F=2.0 / 5P Glass Lens
View Angle: Diagonal - DISTORTION 123° / Horizontal - DISTORTION 105°
Day/Night Mode: Yes
Video Resolution: 1920*1080 / 1080*720 / 720*480 / 30fps
Video: MP4 / H.264 Dual stream
Picture Resolution: 5MP/8MP = 2592x1944/3264x2448
DateTime stamp: Yes
Mode: Camera / Video / Camera+Video; Programmable
Camera + Video: First take Picture then Recording Video
Video Length: 20 - 60sec; Programmable
PIR Sensitivity: High/Middle/Low
PIR Distance: 10 - 12 meters / 35 - 40 feet Angle: 120°
Trigger Time: 0.4 - 0.6s
Trigger Interval: 3s - 20s
Device Serial No.: Yes
IR LEDs: 4 Piece 940nm IR LED / Power: 1 watt / Angle: 60 degree
IR LED Range: 12 - 15 meters / 40 - 50 feet
Stand-by Current : 0.15mA
Stand-by Time: 2 - 24 months (with extend power bank or power supply)
Power Consumption: 350mA (+940mA when whole 4 IR LEDs light up)
Power Supply: DC5V, Storage: up to 128GB / Class 10(not included)
Operation Temperature: -20°C to 60°C
1 * Home Security Motion Detection Camera
1 * Camera Holder
1 * User Manual
1 * Power Cable
1 * Power Supply
1 * USB Cable
How to config the camera's settings?
For config , please following below steps:
please first insert the micro SD card to the device, connect with battery or power supply, then move the mode switch to F side, and move power switch to ON side, it will flashing red and blue LED light, wait for 30 seconds, it will write the data to the micro SD card.
Then connect it to computer via USB cable, and keep the mode switch to F side, move the power switch to OFF and move to ON agian,it will read as movable disk. You can see the config.dat on the device.
Open it with txt file edit software, now you can edit it as below content:
First need modify "UPDATA=0" to "UPDATA=1", then you can edit other values according the user manual. After it finished please save the files.
Plug out the camera from computer USB port.
And move the power switch to off, keep the mode switch to F side, and switch power switch to ON again, wait for 30 seconds, it will update the new value to the device. Now, move the mode switch to W side to start working.
NOTE: FOR THE NEW PIR680 CAMERA IS CANCEL THE MODE SWITCH, JUST MOVE POWER SWITCH TO ON OR OFF TO UPDATE THE SETTINGS.
IF cannot playback the recorded videos please download KMPLAYER.