CPE355 Wireless Bridge,5.8G Outdoor Point to Point Access PTP/PTMP Plug & Play CPE Network 300Mbps 1.86ML Long Range WiFi Extender with 14DBI High Gain Antenna,POE Power Adapter
CPE355 Wireless Birdge is an outdoor high power and high-performance CPE to Extend your Network, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection; The transmission speed between 2 bridges max is 300Mbps; The highest network speed that can be achieved max is 100Mbps; The transmission distance max is 3 km /1.86 miles
•[Point to Multiple Point Video Surveillance]: the DVR system which connects to the master bridge to receives the IP cameras which connects to the slave bridges' video stream for different building or place, management different building's IP cameras in one system without complicated wire connection, easy to cover river, lake, highway, railway with wireless transmission.
•[Easy to Installation]: the both wireless bridges will auto pairing in one minutes when connects it to the PoE power adapter, pre-programed point to point mode, no need to connect to the computer for configure, save your time and great for the newbie who do not need to learn a lot of internet knowledge, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 3KM / 1.86 miles in 60 a degree angle of the front direction.
•[Long Range Transmission Distance]: the wireless bridge can reach up to 3KM /1.86 miles transmission distance(Barrier-free), provide up to 100Mbps wired network speed, built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. the trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house.
•[Widely Applications & Outdoor Weatherproof] - IP65 rated weatherproof housing that ensures continued operation on harsh outdoor environments, point to point or multiple point connection for outdoor access point, internet network extender, remote video surveillance usage, to share your WiFi to your Barn Garage Store and Warehouse. Enterprises can use this bridge to share the network from different offices, workshops, warehouses etc.
Wireless Bridge CPE355 Kits, Extend your Network form One Building to Another without Wire Connection
Great for share internet network to a long distance, works as outdoor access point, management video surveillance for different building
The CPE355 kits is one pair of outdoor high power and high performance 300Mbps wireless bridges, which works at 5GHz frequency. Supports Point-to-Point and Point-to-Multipoint wireless connection. It is more stable and higher speed and anti-interference performance than 2.4GHz wireless bridge. Moreover, it is easy to manage through the WEB interface.
CPE355 Kits Function:
- the device can works as Auto pairing mode: simply to use, connect both bridges to the PoE power adapter to start working, it will auto pair in few minutes. Customize mode: need connect the bridges to the computer through ethernet cable, and configure the master & slave parameters, this mode suit for experienced technician.
- the device can use for share internet networks to a long distance, output WiFi hot point, also can use for transmit the long ranges IP cameras' video stream to the control center without complicated wiring connection.
- Auto pairing mode works for point-to-point access connection, customize mode can configure the point to multiple point connection.
CPE355 Kits Application:
- Share internet networks to a longer distance, the master bridge gets internet and transfer to slave which can connect to router or computer
- Outdoor access point, the master bridge connects to internet source and output WiFi hot point transmit up to 1.8miles & 60 degrees angle, you can get access the WiFi hot point in this area.
- Connect the IP cameras from another building without wire connection, you can management the different place IP cameras in one DVR system.
- Point to multiple point access, you can connect multiple slave bridges, to management more than one building's IP cameras in one DVR system.
Point-to-Point Connection for Extend Internet Network
Connection Guide
The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.
Wireless Bridge Master & Slave Set:
1.Master Bridge Setting
Move the mode switch to "A" position, the device works as master bridge
2.Slave Bridge Setting
Move the mode switch to "B" position, the device works as slave bridge
Wireless Bridge Connection
1.Bridge A Connection - Master Bridge
Step 1: the LAN port of the PoE Adapter connect to the router through an ethernet cable.
Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.
2.Bridge B Connection - Slave Bridge
Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable
Step 2: the LAN port of the PoE adapter connect to the LAN port of the computer or router by another ethernet cable
Point-to-Point Connection for Video Surveillance
Connection Guide
The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.
Wireless Bridge Master & Slave Set:
1.Master Bridge Setting
Move the mode switch to "A" position, the device works as master bridge
2.Slave Bridge Setting
Move the mode switch to "B" position, the device works as slave bridge
Wireless Bridge Connection
1.Bridge A Connection - Master Bridge
Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.
Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.
2.Bridge B Connection - Slave Bridge
Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable
Step 2: the LAN port of the PoE adapter connect to the LAN port of the switch by another ethernet cable
Point-to-Multiple Point Connection for Video Surveillance
Connection Guide
The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.
Wireless Bridge Master & Slave Set:
1.Master Bridge Setting
Move the mode switch to "A" position, the device works as master bridge
2.Slave Bridge Setting
Move the mode switch to "B" position, the device works as slave bridge
Wireless Bridge Connection
1.Bridge A Connection - Master Bridge
Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.
Step 2: the PoE port of the PoE adapter connect to LAN port of the master bridge by another ethernet cable.
2.Bridge B Connection - Slave Bridge
Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable
Step 2: the LAN port of the PoE adapter connect to the LAN port of the IP cameras by another ethernet cable
CPE355 Wireless Bridge Interface
Overview
The wireless bridges work by two modes, auto pairing mode with pre-programmed suit for newbie and customize mode suit for experienced user.
Auto pairing mode:
Connect the bridges to the PoE power adapter, the Power LED lamp turns green, system is power on, when both bridges are power on, they will auto pair in a few minutes, during the pairing the LAN status LED lamps all turn green. The digital LED indicator displays the numeric in red color.
You can find a good frequency without interference by pressing the "RST" button to change the channel, short press the button, the LED indicator will display the numeric "0","1","2","3"..."F" one by one, and change in cycle, each numeric means a different frequency, you can find the details in the user manual.
At the auto pairing mode, the bridge also output WiFi hot point, and the access password is pre-programmed in auto paring mode. When the channel changes, the access password changes as well. For example: the WiFi hot point name is CPE5G_5G161, and the default password is zllinkcpe123456161, if the name is CPE5G_5G153, the password will be zllinkcpe123456153. The last three numbers of the password must match the last three numbers of the name.
Customize mode:
At this mode the bridged must be connected to the computer and set different IP addresses and working modes, short press the "RST" button will not functional at this mode, but you can press and hold this button for over 10 seconds to reset to factory setting.
Application
Parameters
Model: |
CPE355 |
Network Interface: |
10/100Mbps 2 * LAN Port |
Data Rate: |
11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps / 11n: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M, 65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M, 115.6M, 130M, 144.4Mbps |
Power Supply: |
POE 24V 1.0A |
Antenna: |
14DBi (5180~5825MHz) |
Transmittion |
3KM / 1.86 Miles |
Waterproof: |
IP65 |
Dust-proof: |
Support |
Working temperature: |
-4℉~158℉ |
Dimensions: |
250mm * 90mm * 65mm / 9.8'' * 3.55'' |
Weight: |
1.1kg / 38.8 oz (A pair) |