• New
Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
search
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna
  • Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna

Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna

$182.99

Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point WiFi Outdoor AP CPE Kit with 16dBi High-Gain Antenna, Long Range Up to 3KM for PTP/PTMP, WiFi Bridge with Ethernet Port 2-Pack (1000Mbps)

Quantity

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

  • [Point to Point Wireless Bridge]: CPE1100 is a 5GHz 1000Mbps Long Range WiFi Extender Outdoor Wireless Bridge CPE Kit with ethernet port. It can extend outdoor WiFi connection. The Wi-Fi range is up to 3KM and with LED display to configure the PTP/PTMP connection, more stable Support AP and bridge operation mode, simple to pair together, meet with multiple Wi-Fi transmission scheme demands. This wireless bridge point outdoor is Waterproof, dust proof, with lighting protection.
  • [Multiple operation modes]: suit for different network & environment: Connect an IP Surveillance Camera to the network extender’s slave model and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the WiFi Extender gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR.
  • [Point to Point Connection for Wireless Coverage]: Multi-Mode wireless WiFi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support DHCP server; WiFi coverage before 2 houses with 3KM distance. This outdoor WiFi extender long range transmits via wireless WiFi, reducing the trouble of wiring cable
  • [Tips on product how to use]: Its LED Display can show operation mode/channel/signal strength, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. Saving much human work and cost. This outdoor wireless bridge aka WiFi wireless access point extender makes the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
  • [Coolest Wireless Bridge]:1000Mpbs digital display network bridge wireless aka WiFi outdoor access point extender, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. Share the same network with your garage, barn, stable, warehouse, shop etc.

Internet Extender CPE1100 Kits, extend your Network form One Building to Another without Wire Connection

outdoor access point

Great for extending your home network to a long distance, works as outdoor access point, manage video surveillance for different buildings

CPE1100 is an 1000Mbps Outdoor CPE support 3KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, more stable and simpler to build the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet wifi bridge kit Waterproof, dust proof, lighting protection. The long range wireless bridge works at 5GHz frequency, which is more stable and of higher speed and anti-interference performance than 2.4GHz wireless bridge. It’s easy to manage through the WEB interface.

CPE1100 Kit Function:

A. the device has two pairing modes. The auto pairing mode and the customize mode. In auto pairing mode, you simply connect both bridges to the PoE power adapter, the bridges will auto pair in a few minutes. In customize mode, you can use the ethernet cable to connect the bridges to the computer to configure the master and slave parameters. This mode is more suitable for experienced user.

B. You can use the device for extending your home network to a long distance, output WiFi hot point, also you can use it for transmitting the long ranges IP cameras' video stream to the control center without complicated wiring connection.

C. For point-to-point access connection, you can use the auto pairing mode. For point to multiple point connection, you can use the customize mode.

CPE1100 Kit Application:

1.Long distance internet sharing, the master bridge gets the internet and transfer it to the slave bridge which is connected to the router or computer

2. Outdoor access point, you can send a Wi-Fi signal into a much larger area. For example, they can be used to send Wi-Fi into a large courtyard outside the main building. There are also outdoor access points that send a wireless signal from one router to another, which is really useful if you have a guest house that you want Wi-Fi in. Whatever your Wi-Fi needs, we’ve found the best outdoor access point for you. The master bridge connects to the internet source and output WiFi hot point transmit up to 1.8miles & 60-degree angle, you can get access to the WiFi hot point in this area.

3. Connect to the IP cameras from another building without wire connection, you can manage the IP cameras of different places in one DVR system.

4. Point to multiple points access, you can connect to multiple slave bridges, to manage more than one building's IP cameras in one DVR system.

IF YOU DON'T HAVE ANY IT KNOWLEDGE, PLEASE CONSULT RELEVANT PROFESSIONALS BEFORE PURCHASING.

Point-to-Point Connection for Extending Internet Network

wifi range extender

Connection Guide

The master bridge and slave bridge must be installed face to face, the antenna is not omnidirectional, it has a 60-degree transmission angle, the straight installation without blocking objects would get the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connects to the router through an ethernet cable.

Step 2: the PoE port of the PoE adapter connects to the LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connects to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connects to the LAN port of the computer or router by another ethernet cable

Point-to-Point Connection for Video Surveillance

wifi extender outdoor long range

Connection Guide

The master bridge and slave bridge must be installed face to face, the antenna is not omnidirectional, it has a 60-degree transmission angle, the straight installation without blocking objects would get the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connects to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connects to the LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connects to the LAN port of the slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the switch by another ethernet cable

Point-to-Multiple Point Connection for Video Surveillance

outdoor ap

Connection Guide

The master bridge and slave bridge must be installed face to face, the antenna is not omnidirectional, it has a 60-degree transmission angle, the straight installation without blocking objects would get the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connects to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connects to the LAN port of the master bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connects to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connects to the LAN port of the IP cameras by another ethernet cable

CPE1100 Wireless Bridge Interface

internet extender

Overview

The wireless bridges work by two modes, auto pairing mode with pre-programmed suitable for newbie and customize mode suitable for experienced user.

Auto pairing mode:

Connect the bridges to the PoE power adapter, the Power LED lamp turns green, system is power on, when both bridges are power on, they will auto pair in a few minutes, during the pairing the LAN status LED lamps all turn green. The digital LED indicator displays the numeric in red color.

You can find a good frequency without interference by pressing the "RST" button to change the channel, short press the button, the LED indicator will display the numeric "0","1","2","3"..."F" one by one, and change in cycle, each numeric means a different frequency, you can find the details in the user manual.

At the auto pairing mode, the bridge also output WiFi hot point, and the access password is pre-programmed in auto paring mode. When the channel changes, the access password changes as well. For example: the WiFi hot point name is CPE5G_5G161, and the default password is zllinkcpe123456161, if the WiFi hot point name is CPE5G_5G153, the password would be zllinkcpe123456153. The last three numbers of the password must match the last three numbers of the name.

Customize mode:

At this mode the bridged must be connected to the computer and set different IP addresses and working modes, short press the "RST" button will not be functional at this mode, but you can press and hold this button for over 10 seconds to reset to factory setting.

Application

outdoor wifi antenna

Parameters

Network Interface: 10/100Mbps 2 * LAN Port

Data Rate: 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps / 11n: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M, 65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M, 115.6M, 130M, 144.4Mbps

Power Supply: POE 24V 1.0A

Antenna: 16DBi (5725~5875MHz)

Transmission: 1.86 Miles / 3KM

Waterproof: IP65

Dust-proof: Support

Working temperature: -4℉~158℉

Dimensions: 9.8'' * 3.55'' * 2.56''

Weight: 38.8 oz

Gigabit Wireless Bridge,5.8G 1000Mbps 1Gbps Point to Point CPE
600 Items
Comments (0)
No customer reviews for the moment.